AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateStyles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
See the difference
Before
After
Before
After
Before
AfterHow Much Does Furnace Replacement Cost in Hollywood?
Furnace replacement in Hollywood typically costs between $3,500 and $7,500 for the equipment and installation, with most homes landing in the middle of that range once the old unit is hauled away and the new one is running. That figure is an estimate for a straightforward swap; the written estimate we provide after we see your setup sets the final price. If your system is still limping along, a furnace repair often runs $150 to $700 and can buy you more time, so it’s worth asking whether replacement is really the better call this season.
Furnace Replacement Cost Breakdown (2026)
Here’s how the numbers break down for a Hollywood home. Every job is a little different, and the line items below are typical estimated ranges, not a quote. The written estimate you get after an assessment is the number that matters.
| Line Item | Typical Estimated Range |
|---|---|
| Furnace unit (equipment) | $1,800 – $4,200 |
| Labor and installation | $1,200 – $2,400 |
| Removal and disposal of old unit | $100 – $300 |
| Ductwork adjustments or sealing | $200 – $800 |
| Thermostat upgrade | $100 – $400 |
| Electrical or venting work | $150 – $600 |
| Typical total installed | $3,500 – $7,500 |
What pushes a job toward the top of that range? A larger unit sized for a bigger house, a system that needs new duct runs or a fresh venting path, an electrical panel that needs adjustment, or a brand whose equipment costs more at the wholesale level. What keeps it lower? A clean swap where the ductwork is sound, the electrical is ready, and the new furnace is a like-for-like size. We work on nine major brands, so we’re not steering you toward one expensive make; we size the job, explain what’s driving the cost, and let you choose from real options. A brand-agnostic approach means the estimate reflects your home, not a preferred product line.
What Affects Furnace Replacement Pricing in Hollywood
Hollywood’s mild winters don’t mean the heating system is an afterthought. Homes here run heat for a few short stretches, and that pattern shapes how replacement pricing lands. Here’s what moves the number:
- System size and home layout. A furnace sized for a small condo costs less than one built for a larger single-family home, and a house with an awkward layout or a tight attic space takes more labor to work around.
- Fuel type and equipment. Furnaces vary by fuel source, and the equipment cost swings with the brand and efficiency level. Because we handle Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, you have genuine equipment choice instead of a single catalog page.
- Ductwork condition. Many Hollywood homes are older, and the ducts feeding a replacement furnace may need sealing, resizing, or minor rerouting. That work is quoted separately so you can see exactly what you’re paying for.
- Electrical and venting. A new unit sometimes needs a dedicated circuit, a new disconnect, or a venting change. These are common add-ons in homes that were built before modern equipment.
- Access and location. A furnace tucked in a closet, attic, or crawl space takes longer to remove and install than one with open access. Labor is time, and time is cost.
- Whether it’s repair or replace. Before quoting replacement, we diagnose the actual problem. A bad igniter or a clogged component can cost $150 to $700 to fix, and if the unit has life left, that’s the honest recommendation even if it’s a smaller job for us.
Repair or Replace? How We Decide
We diagnose first, then recommend. If a furnace is failing because of a repairable part, the fix typically falls in the $150 to $700 furnace repair range, and we’ll tell you so. Replacement makes more sense when a unit is old, has had repeated failures, or when the repair cost climbs toward a large share of what a new system would cost. What we won’t do is quote a full replacement when a repair will do, and we won’t pressure you into a brand you didn’t ask for. Our technicians have up to 15 years of experience, and much of that is spent telling homeowners the difference between “this needs a cheap part” and “this is genuinely near the end.”
If you’re weighing the two, an honest assessment from someone familiar with your specific equipment is worth more than a guess. That’s the whole reason we cover as many brands as we do: so we can read the situation and give you a straight answer rather than a sales pitch. You can read about how we approach repair and installation at Ashton AC Repair.
How to Save on Furnace Replacement
There’s no magic discount that makes a furnace cheaper, but a few practical moves keep the bill closer to the low end of the range:
- Get a clear, itemized estimate before work begins. An estimate that lists equipment, labor, removal, and any duct or electrical work lets you see where the money goes and avoid surprise additions. Ours are free and set the final price in writing.
- Don’t let a small fault become a big one. A furnace that’s short-cycling or not igniting usually costs far less to fix than to replace. If your unit is struggling, a repair now can defer a replacement for years.
- Match the unit to the house. Oversized equipment costs more upfront and often runs less efficiently. Correct sizing is part of the assessment, and it can keep you out of the premium end of the range.
- Ask what’s reusable. Thermostats, ducts, and some components sometimes survive a replacement. When they do, that work comes off the estimate.
- Choose equipment from real options. Since we work across nine brands, you can compare equipment instead of accepting a single quote. Call (833) 854-7099 and we’ll walk through what fits your home and budget.
What Happens When You Call
When you reach out for a furnace replacement estimate in Hollywood, we start with a diagnosis, not a sales pitch. We look at the existing system, check the ductwork and electrical setup, and confirm whether a repair is the better answer. Then you get a written estimate that breaks down equipment, labor, and any extras. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is available when the schedule allows, and there’s no charge for the estimate itself.
Because we handle both cooling and heating under one company, you’re not juggling two contractors when a replacement touches the rest of your system. That’s one of the reasons homeowners in Hollywood call us – heating and cooling handled together, across the brands they already own.
Why Brand Knowledge Matters on a Replacement
A furnace replacement isn’t only about dropping in a new box. It’s about matching a unit to the ductwork that feeds it and the controls that run it, and understanding how the manufacturer builds that particular line. Because our technicians work across Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard, we can spot the small differences that separate a smooth install from a callback. That brand familiarity also means fewer wrong-part delays and a sharper diagnosis when something goes wrong down the road.
If your current system is a name-brand unit you’ve lived with for years, you likely want someone who knows that equipment. We’re the call for homeowners who don’t want to hear “we only work on a few systems.” Nine brands, one call.
FAQs – Furnace Replacement Cost
How much does furnace replacement cost in Hollywood in 2026?
Most fully installed replacements run $3,500 to $7,500, with equipment typically $1,800 to $4,200 and labor $1,200 to $2,400. Duct and electrical work can add $200 to $800 depending on the home. Call (833) 854-7099 for a free estimate, and know that the written estimate sets the final price.
Is it cheaper to repair or replace my furnace?
A repair usually costs $150 to $700, so if the fault is a part and the unit has life left, repair is the cheaper route. Replacement makes sense when the system is old or failing repeatedly. We diagnose first and tell you honestly which you’re facing. Call (833) 854-7099 for a free assessment.
Can you come today for a furnace estimate in Hollywood?
Often yes – same-day service is available when the schedule allows, and estimates are free. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 854-7099 to get on the schedule.
Why does the replacement quote vary so much between companies?
Quotes vary by equipment brand, duct condition, electrical work, and whether removal and disposal are included. A $3,500 quote and a $7,500 quote can both be honest if they cover different scopes. Our written estimate itemizes each piece so you can compare fairly. Call (833) 854-7099 for a line-item estimate.
Do you work on my furnace brand?
Almost certainly – we service nine major brands, including Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard. That breadth means faster diagnosis and correct parts sooner than a single-brand shop. Call (833) 854-7099 to confirm your specific model.
Get a Straight Answer on Your Furnace
Replacing a furnace is a real expense, and you deserve numbers you can act on rather than a vague “it depends.” Call (833) 854-7099 for a free estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We diagnose first, recommend honestly, and put the price in writing so there are no surprises. We work on your brand, wherever you fall across the nine major lines, and we’ll tell you when a repair is the smarter move. If your heating has been unreliable, the sooner it’s assessed, the more options you’ll have before the season turns. Reach out, and we’ll take a look.
Pricing reflects the Hollywood market as of 2026. Ashton AC Repair offers free estimates – call (833) 854-7099.
Written by the team at Ashton AC Repair.
What Our Customers Say
"Maintenance plan is actually worth it. They come twice a year, they show up, and the last visit caught a refrigerant leak before it turned into a July disaster."
- Tiana Nash"Drain line was clogged and the safety switch had shut the whole system down. Cleared it, flushed it, and installed a proper cleanout so I can pour vinegar through it myself once a season."
- Angela Nguyen"Fixed the immediate issue and was honest that the unit is old enough that I should be saving for a replacement. Slightly more expensive than I hoped but he was upfront before starting."
- Alejandro Reyes