AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted Furnace Repair for Hollywood Homeowners
A furnace that won’t light, cycles on and off, or blows cool air leaves a Hollywood home uncomfortable fast, even in a mild winter. Furnace repair in Hollywood typically runs $150 – $700, and most of that work is finished the same day. Our technicians have up to 15 years of experience across nine major HVAC brands, so they diagnose your equipment before recommending anything. We work on Trane, Lennox, Goodman and Rheem systems, along with Carrier, York, Daikin, Bryant and American Standard. When your heat quits, call (833) 854-7099. We answer 24/7, and we offer fast dispatch from 7am to 7pm, Sunday through Friday.
Furnace Maintenance
Furnace Maintenance is the scheduled service that keeps a heating system running through the cooler months and catches worn parts before they fail. You need it when the system has gone a full season without attention, when the heat feels weaker than it used to, or when you plan to rely on the furnace through an unusual cold snap. Ashton AC Repair inspects the burner, checks the heat exchanger and airflow, and confirms the safety controls are working. Typical furnace maintenance in Hollywood runs $80 – $200, and the written estimate sets the final price.
What a Maintenance Visit Covers
Our technicians check combustion, clean the burners, test the ignition sequence and confirm the blower moves air as it should. They also look at the filter and the wiring connections. You get a written report of what was found, and technicians are not paid on what they sell.
How Often to Book It
Once a year, before the heating season starts, is the usual rhythm here. Homes that run the furnace often, or that sit near tree cover where debris collects, benefit from a closer look. A short visit now is cheaper than a repair later.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Heat Pump Repair
Heat Pump Repair covers the diagnosis and fixing of a heat pump that won’t heat, won’t cool, or runs but can’t keep up with the thermostat. You need it when the system blows room-temperature air, ices over, or trips the breaker, and heat pump problems in South Florida can show up in either season because one system handles both. Ashton AC Repair tests the reversing valve, refrigerant charge and defrost cycle before recommending a fix. Typical heat pump repair in Hollywood falls within $150 – $700, and the free estimate sets the final price.
Heating and Cooling in One Unit
A heat pump moves heat rather than burning fuel, so a failing component can affect both seasons. Our technicians check the whole system rather than just the mode that broke. That matters when the same unit cools your home in July.
Why the Reversing Valve Matters
The reversing valve switches the unit between heating and cooling, and a stuck valve is a common reason a heat pump won’t heat. Testing it takes a technician who knows the brand. We work on Trane, Lennox and Goodman heat pumps regularly.
Heating Repair
Heating Repair is the diagnosis and repair of any residential heating system that isn’t producing reliable warmth, whether it’s a furnace, a heat pump, or a gas-fired unit. You need it when the system short-cycles, makes new noises, or leaves rooms cold, and it makes sense to call early rather than run a struggling system through the season. Ashton AC Repair sends a technician who checks the thermostat, ignition, airflow and safety controls in a single visit. Typical heating repair in Hollywood runs $150 – $700, and the written estimate sets the final price.
Symptoms That Point to a Repair
Short cycling, a furnace that lights then shuts off, unusual rumbling or a thermostat that never reaches its set point all point to a repair rather than a setting problem. Catching these early usually keeps the repair small. Left alone, small faults wear out bigger parts.
Repair or Replace, Honestly Assessed
We diagnose first, then recommend. If a repair will restore reliable heat, that’s what we tell you. If the unit is beyond economical repair, we explain why and lay out the replacement numbers before you decide anything.
Boiler Repair
Boiler Repair handles the diagnosis and fixing of a boiler that won’t heat water, leaks, or loses pressure, and it’s the service to call when radiators stay cold or the boiler shuts down on its own. You need it when the pressure gauge drops repeatedly, when you hear banging or kettling, or when the system takes far longer to warm up than it used to. Ashton AC Repair checks the burner, controls and water-side components together. Typical boiler repair in Hollywood runs $150 – $700, with the free estimate setting the final price.
Pressure and Leak Checks
Boilers run on a closed water loop, so a falling pressure gauge usually means a leak or a failing relief valve. Our technicians check both before recommending parts. Ignoring a slow leak tends to turn a small fix into a larger one.
Noises and What They Mean
Banging, kettling or gurgling sounds often point to air in the system or mineral buildup in the heat exchanger. A technician can confirm which. That distinction matters because the fixes are different.
Gas Furnace Repair
Gas Furnace Repair covers the safe diagnosis and repair of a gas-fired furnace that won’t ignite, produces weak heat, or shows signs of incomplete combustion. You need it the moment you smell gas, hear unusual booming, or notice the flame burning yellow instead of steady blue, and you should stop using the system and call until a technician clears it. Ashton AC Repair checks the ignition, gas valve, flame sensor and heat exchanger. Typical gas furnace repair in Hollywood runs $150 – $700, and the written estimate sets the final price.
Safety First With Gas Equipment
Gas appliances and the fuel lines feeding them carry real risk, and this is not work for a homeowner with a wrench. If you smell gas, leave the home and call for help before doing anything else. Our technicians test for leaks and combustion safety as part of the diagnostic.
Ignition and Flame Sensor Faults
A furnace that lights and then shuts off within seconds usually has a flame sensor or ignition problem. These are common and usually repairable. Diagnosis first, then the fix.
Furnace Tune Up
Furnace Tune Up is the focused adjustment and cleaning service that keeps a furnace running at its best and catches issues before they turn into a breakdown. You need it when the heating season is approaching, when the system has run a full season without a check, or when you’ve just moved into a home and don’t know the equipment’s history. Ashton AC Repair runs the full sequence and hands you a written report. Typical furnace tune ups in Hollywood run $80 – $200, and the written estimate sets the final price.
What Gets Adjusted
Technicians clean the burners, check the igniter, adjust the blower and confirm the thermostat calls for heat correctly. Inspection and adjustment are done together. The result is a furnace that starts cleanly and holds temperature.
Getting a Written Report
You get a written account of what was found and what was adjusted. Nothing is sold on commission. If the report flags a worn part, you decide whether to replace it now or keep an eye on it.
Emergency Furnace Repair
Emergency Furnace Repair is the fast-response service for a heating system that has failed outright when you need it most, whether the furnace won’t start, the heat exchanger is making alarming noises, or the unit is blowing cold air in cold weather. You need it when a failed system leaves the home unsafe or unlivable, and it’s worth calling quickly rather than waiting for a convenient slot. Ashton AC Repair dispatches a technician fast, and we keep an eye on the safety side first. Typical emergency furnace repair in Hollywood runs $150 – $700, and the written estimate sets the final price.
When to Call Right Away
Smelling gas, hearing loud booming from the furnace, or seeing a flame that burns yellow are all reasons to stop using the system and call. A failed system in cold weather is a real health concern, especially for older residents and young children. Call (833) 854-7099 and we’ll book the next opening.
What We Do When We Arrive
The first pass is a safety check on the gas and electrical side. Then the technician narrows down the failure and gives you a clear fix and price. You decide before any work begins.
Brands We Service
We service Trane equipment and know where it wears out as the years add up. Trane units tend to hold up well but can develop ignition and airflow issues that need a careful eye. We also service Lennox furnaces, and we’re familiar with the specific controls and parts that tend to fail on them. Goodman is another line we handle regularly, and we know its common thermostat and burner faults.
Rheem rounds out the major lines we work on, and its heat exchangers and controls are a regular repair item. Whether you have Trane, Lennox, Goodman, Rheem, or any other make, we can help. Our technicians have up to 15 years of experience across nine brands, so a diagnostic rarely stalls on an unfamiliar control board or ignition module.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- No heat at all. The furnace runs but never warms the house, or the thermostat never calls for heat and nothing happens. A total failure usually points to ignition or a control board fault that needs testing, not guessing.
- Yellow or flickering flame. A healthy gas flame is steady blue. A yellow or dancing flame suggests incomplete combustion and is a safety concern, so shut the system down and call.
- Repeated short cycling. The furnace starts and stops every few minutes instead of running steadily. This wears the ignition and blower parts fast and often signals an airflow or sensor issue.
- Strange smells or noises. Metallic rumbling, banging, or a smell of gas or burning dust that won’t clear are all reasons to stop using the system. These are the symptoms a technician needs to see early.
- Rising energy bills. A furnace working harder than it should shows up on the bill before it fails. A tune up or a small repair now is cheaper than a breakdown later.
Our Process, Step by Step
- 1
Book the visit. Call (833) 854-7099 and tell us the symptom and the equipment brand. We answer 24/7 and book the next opening, with fast dispatch from 7am to 7pm, Sunday through Friday.
- 2
Diagnose first. The technician runs a full check of ignition, airflow, gas and electrical controls using diagnostic gauges and combustion readings. Nothing gets replaced before we know the actual cause.
- 3
Explain the options. You get a plain-language summary of what’s wrong and what a fix involves. If a repair will restore heat, that’s the recommendation. If replacement makes more sense, we show you why.
- 4
Set a written price. The estimate is free and the written estimate sets the final price. There’s no diagnostic fee and no surprise line items.
- 5
Complete the work and check it. The technician makes the repair, runs the system through a full heating cycle, and confirms the controls and safety devices work before leaving.
How Much Does Furnace Repair Cost in Hollywood?
Furnace repair in Hollywood typically runs $150 – $700, and the final figure depends on the fault and the parts involved. A gas furnace repair often sits in the middle of that range, while a heat pump reversing valve or a boiler component can push toward the upper end. A simple ignition or sensor repair usually lands lower because the part and labor are modest.
Several things move the number: the brand and model of the equipment, whether the part is standard or specific to that line, how accessible the furnace is, and whether the fix is a single component or a chain of related parts. A technician who knows Trane, Lennox, Goodman or Rheem equipment gets to the correct diagnosis faster, which keeps labor hours down.
The easiest way to avoid overpaying is to get the diagnosis in writing before work starts and confirm what’s included. Our free estimate spells out the parts, the labor and the total. No diagnostic fee is charged, and no pressure is applied. Call (833) 854-7099 for an exact quote.
Our Service Area Near Hollywood
We serve homeowners throughout Hollywood and the surrounding neighborhoods, including Dania Beach, Hallandale Beach, West Park, Ives Estates, Aventura, Ojus, Sunny Isles Beach, North Miami Beach and Golden Glades. If your furnace fails in any of these areas, we book the next opening and send a technician fast. Call (833) 854-7099 to schedule service in Hollywood, Dania Beach, or Hallandale Beach.
Serving Hollywood, FL – Our Local Coverage Area
We serve Hollywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Furnace Repair in Hollywood
Furnace repair is the diagnosis and fixing of a heating system that isn’t working, covering ignition, airflow, controls, and the safety components. It’s the service to call when your heat quits, the flame burns wrong, or the system short-cycles. A technician tests the system, finds the actual fault, and repairs it. Call (833) 854-7099 for a free estimate.
Most furnace repairs finish within a single visit, often in one to three hours depending on the fault and the part. Common sensor and ignition fixes are quick. A component that needs a brand-specific part may take longer to source, and we’ll tell you the timing up front. Call (833) 854-7099 to schedule.
Furnace repair in Hollywood typically runs $150 – $700, with the exact figure depending on the fault and parts. Tune ups run $80 – $200, and a heat pump or boiler repair sits within the same range. The written estimate sets the final price, and there’s no diagnostic fee. Call (833) 854-7099 for an exact quote.
Yes, we service Trane furnaces along with Lennox, Goodman, Rheem, Carrier, York, Daikin, Bryant and American Standard equipment. Our technicians have up to 15 years of experience across those lines. That breadth means a diagnostic rarely stalls on an unfamiliar control. Call (833) 854-7099.
Yes, same-day service is often available, and we answer the phone 24/7. Fast dispatch runs 7am to 7pm, Sunday through Friday, and we’re closed on Saturday. If you call outside dispatch hours, we book you into the next opening. Call (833) 854-7099 and we’ll find you a slot.
Warranty terms depend on the part and the work performed, and we confirm them in writing with your estimate. The written estimate spells out what’s covered before any work begins. If a part carries a manufacturer warranty, we note it for you. Call (833) 854-7099 to ask about coverage for your repair.
Clear access to the furnace, note the symptoms you’ve seen, and have the equipment brand and model ready. If you’ve noticed a gas smell, don’t run the system and mention it when you book. Write down anything unusual you’ve heard or smelled. Call (833) 854-7099 when you’re ready to schedule, and we’ll walk you through the rest.
Schedule Your Furnace Repair Service in Hollywood Today
Don’t let a failing furnace run through the season on borrowed time. Call (833) 854-7099 to book a visit, and a technician will diagnose the issue and give you a no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Nine brands, one call. Repair or replace, honestly assessed. Ashton AC Repair handles your heating and cooling under one roof.
Written by the team at Ashton AC Repair.